NEWS

1. External inspection should be carried out before each use to check whether there is any damage, wear or tear, scratch, etc. on the surface. It is forbidden to use sand holes in case of air leakage. The inspection method is that after the inside of the glove enters the air, the glove is curled in the direction of the finger and kept closed. When the glove is rolled to a certain extent, the internal air is compressed, the pressure increases, the finger expands, and the leakage is carefully observed.

2. Use insulating gloves, do not grasp objects with sharp surface and burrs, in order to avoid damage to insulating gloves.

3. After using insulating gloves, the dirty dirt on the surface of gloves should be wiped and dried.

4. Insulating gloves should be stored in dry, cool and ventilated places, and placed upside down in finger-shaped brackets or in special cabinets. Insulating gloves should not be stacked with any articles.

5. Insulating gloves should not be mixed with grease, solvent, qualified and unqualified gloves to avoid confusion in use.

6. Insulating gloves are tested every six months. The test standard is implemented according to the "Safety Regulations" and registered. Gloves beyond the test period are not allowed to be used.